VICTORY Ⅱ HAND-HELD UV LED / WHITE LIGHT LAMP
The VICTORYⅡ is a portable, hand-held UV lamp designed for non-destructive testing applications such as fluorescent penetrant testing and magnetic particle inspections. It fully complies with NDT specifications, including ASTM E3022 and RRES 90061. Lightweight and rugged, it boasts an IP64 rating, ensuring dust-tight and water-resistant performance. With its state-of-the-art heat sink design, the VICTORYⅡ is mechanically cooled without the need for a fan.
| Type | UV Intensity at 15(38cm) (μW/cm2) | S/N | UV-A Coverage Area at 15 in (38cm) at minimum 1000 μW/cm2 | RRES 90061 | AITM6-1001 | ASTM E3022 |
|---|---|---|---|---|---|---|
| VIC-as1 (UV Only / Fanless) | <5,000 | P7110-2 | 200 mm (Diameter) | v | v | v |
| VIC-as (UV + WH / Fanless) | <5,000 | P7111-2 | 200 mm (Diameter) | v | v | v |
| VIC-sd (UV + WH / Fanless) | ≧8,000 | P7113-2 | 180 mm (Diameter) | v |
Included
UV Lamp *1
UV Goggles *1
Power Supply Adapter *1
12V Battery *1
Carry Case *1
Compliance
RRES 90061
ASTM E3022-18
AITM6-1001
Features
Dust-tight and water-resistant with an IP64 rating
Achieve maximum mobility with extended battery power
With 4 UV LEDs and 1 white light LED
Runs optionally by mains adapter and rechargeable battery pack, 2 ways to inspect the defect
Battery level displayWork properly in fluorescent penetrant and magnetic particle inspection
Safe and pure UV-A content(less than < 20 Lux) with no UV-B and UV-C.
Switch functions between UV and White light illumination
Instant maximum output without pre-heating
Available in two intensities to suit your specific needs.(for VIC-AS type)
Spectrum range：365±5nm
Accessories
UV-A Beam Profiles
VIC-sd & VIC-ad
<
添加微信咨詢！